Installing The Driver For A Cna Card; Installing Drivers For The Pmc 8885E - Lenovo ThinkServer TD350 Installation Manual

1. Download the driver for the HBA card from the Lenovo Web site to your server. The most up-to-date
device drivers for various server models are always available on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the driver to a USB storage device. If the driver is a compressed file, unzip it to a folder. Then,
connect the USB storage device to your server.
Depending on the format of the driver setup file, do one of the following to install the driver:
• For .exe file, go to procedure A
• For .inf file, go to procedure B
Procedure A:
a. Open the folder that contains the driver and double-click the .exe file.
b. In the Emulex windows, click Next.
c. In the Installation options window, click Install.
d. In the Installation completed window, click Finish.
Procedure B:
a. Use the Pnputil-i-a <driverinf> command to install the driver, for example:
e:
cd Management
cd Win7
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of your USB storage device and
Management represents the subdirectory where your driver is located.
b. Restart your server after the installation is completed.

Installing the driver for a CNA card

To install drivers for a CNA card, do the following:
1. Download the driver for a CNA card from the Lenovo Web site to your server. The most up-to-date
device drivers for various server models are always available on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the driver for the Ethernet card to a USB storage device. Connect the USB storage device to your
server.
3. Open the folder that contains the driver and double-click the setup file.
4. In the Click Next to continue window, click Next.
5. In the Installation options window, select your desired option, and then click Install.
6. In the Installation completed window, click Finish.
7. When the command line displays as: Found the following drivers & Press "y" for yes or "n" for no, press
y.
8. When the Would you like to install this device software? window is displayed, click Install and then
press Enter. The installation is completed.

Installing drivers for the PMC 8885e

To install the driver for the PMC 8885e, do the following:
1. Download the corresponding driver from the Lenovo Web site. If the driver is a compressed file, unzip it
to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
.
Chapter 4 Installing drivers
105