Cleaning The Spray Arms; External Cleaning; Frost Precautions; Internal Cleaning - Zanussi ZDT 312 User Manual

Zanussi dishwasher user manual
Hide thumbs Also See for ZDT 312:
Table of Contents

Advertisement

Put the flat filter A back in
the base of the washing
compartment and ensure
that it fits perfectly under
the two guidesD.

Cleaning the spray arms

NEVER try to remove the spray arms.
If residues of soil have clogged the holes in the
spray arms, remove them with a cocktail stick.

External cleaning

Clean the external surfaces of the machine and
control panel with a damp soft cloth. If
necessary use only neutral detergents. Never
use abrasive products, scouring pads or sol-
vent (acetone, trichloroethylene etc....).

Internal cleaning

Ensure that the seals around the door, the de-
tergent and rinse aid dispensers are cleaned
regularly with a damp cloth.
We recommend every 3 months to run the wash
programme for heavy soiled dishes using de-
tergent but without dishes.
18
Replace the filters and
lock by turning the handle
clockwise to the stop.
Prolonged periods of non-
operation
If you are not using the machine for any pro-
longed period of time you are advised to:
1. Unplug the appliance and then turn off the
water.
2. Leave the door ajar to prevent the forma-
tion of any unpleasant smells.
3. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where
the temperature is below 0°C. If this is
unavoidable, empty the machine, close the ap-
pliance door, disconnect the water inlet pipe
and empty it.

Moving the machine

If you have to move the machine (moving house
etc....):
1. Unplug it.
2. Turn the water tap off.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents