Kawai ES520 Owner's Manual page 28

Enhancing the Sound Enhancing the Sound
3. Selecting and adjusting the Effect settings
While the effects settings menu is shown in the display:
Press the or MENU buttons to cycle through the different
effects settings pages.
Press the or VALUE buttons to adjust the value of the
selected effects setting.
* Effect settings can be adjusted within the range from 1 to 10 except
Compressor and Rotary 2(Vibrato/Chorus).
* Compressor settings are as follows.
 Gain (1 - 128)
 Ratio (1:1 - 64.5:1)
 Threshold (1 - 128)
 Attack (1 - 128)
* Rotary 2(Vibrato/Chorus) settings are as follows.
 Vibrato (V-1 ~ V-3)
 Chorus (C-1 ~ C-3)
To exit the effects settings menu and return to normal playing
mode, press the EXIT button or wait 4 seconds.
* Effects settings are independent for each sound variation.
* Any changes made to the effect type, settings, or on/off status will
remain until the power is turned off.
* Preferred effects settings can be stored to a Registration memory for
convenient recall. Please refer to page 37 for more information.
28
Example: To select the "Delay Time" effects setting,
press the MENU button twice.
Example: To increase the "Delay Time" effects
setting, press and hold the VALUE button.