Siemens SINUMERIK 840D sl Function Manual page 369

This structure is based on the following considerations:
● Functional scope and required application knowledge increase from the basic version to
the optional CP_EXPERT version.
● The number of required couplings (following axes, following spindles) and their properties
are decisive in the selection of versions.
– Example of simultaneous operation:
– Example of property:
● Individual versions are independent of each other. They can be combined and can be
activated simultaneously.
Table 8-2 Quantity structure, which is dependent on the execution of coupling modules that can be simultaneously activated
Typ CP versions allow one or more different CPSETTYPE
e coupling objects simultaneously:
A Coupled motion
B Synchronous spindle with |1|:1 coupling
C o./u. Synchronous spindle/multi-edge turning
o./u. Master value coupling / curve tables interpolation
o./u. MCS coupling
D o./u. Electronic gearbox "plain"
o./u. Free generic coupling "plain"
E o./u. Electronic gearbox
o./u. Free generic coupling
o./u. stands for over/under
Table 8-3 Scaling of availability of coupling properties
Type A Type B Type C
20 1 13
TRAIL - coupled motion
20 - 13
1 2
- -
Special functions
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
If sequential operation of 1 x synchronous spindle pair for part transfer from the main to
the supplementary spindle and the 1 x multi-edge turning is required, then the CP-BASIC
option is suitable and sufficient. However, if it cannot be excluded that both operations
can overlap (multi-edge turning running when part transfer is started), the CP-
COMFORT option would be required.
If a coupled axis grouping with a leading axis is required, the base version is sufficient.
For coupled motion groups with two leading axes, one of the optional versions is
required.
Type D Type E
9 5
9 5
2 2
+ +
Base ver‐ CP-
sion STATIC
4 -
- 1
- -
- -
- -
Maximum number of CPSETTYPE-related functionalities (per
type)
Maximum number of coupled motion groups with the following
properties:
→ refer to CPSETTYPE="TRAIL"
Maximum number of master values
Coupling between a spindle and an axis
M3: Coupled axes
8.5 Generic coupling
CP-BA‐ CP-COM‐ CP-EX‐
SIC FORT PERT
4 4
- -
1 4
- 1
- -
1)
8
-
8
8
5
369