Setting The Hdmi Signal Format To Watch 4K Video Content - Sony HT-G700 Operating Instructions Manual

6
Turn on the system.
Tip
4K content can be watched by a device
compatible with HDCP2.2 or HDCP2.3 even
though devices with different versions (ex.
TV compatible with HDCP2.2 and 4K device
compatible with HDCP2.3) are connected.
Setting the HDMI Signal
Format to Watch 4K Video
Content
To watch 4K video content, select the
appropriate setting for the connected
4K TV and 4K device.
1
Press MENU.
[SPEAKER] appears in the front
panel display.
2
Press / to select [HDMI], then
press ENTER.
3
Press / to select [FORMAT],
then press ENTER.
4
Press / repeatedly to select the
setting you want.
• [ENHANCED]: Select when both
the connected TV and devices
support high bandwidth video
formats such as 4K 60p 4:4:4, etc.
• [STANDARD]: Select when the
connected TV and devices support
standard bandwidth video
formats.
For the relation of this setting,
supported video format signals,
and HDMI cables to be used, see
"Supported HDMI Video Formats"
(page 48).
Notes
• Depending on the TV, the TV setting for
HDMI output may be required. Refer to
the operating instructions of the TV.
GB
20
• If the picture is not displayed while
[FORMAT] is set to [ENHANCED], set it to
[STANDARD].