Start/Pause Button - Zanussi ZDC 5375 W Instruction Booklet

6 START/PAUSE Button

This button has 2 functions:
Start: after you have selected the desired
●
programme and options, press this button to start
the tumble dryer. The light close to the button will
stop flashing and remain lit.
If you have selected a delay time option, the
countdown will begin and will be shown on the
display.
Pause: when you press this button again, the
●
programme in progress is interrupted. The light
close to the button will start flashing. To restart
the programme, press the button again.
If the door is opened while the programme is running
the appliance immediately stops drying. The «Pause»
message appears in the display and the
shown above the Door button.
The appliance immediately stops drying, the «Pause»
and «Please close condenser door» messages appear
in the display also when the condenser door is
opened.
This button must be pressed again after closing the
door in order to restart the programme from the point
at which it was interrupted.
This button must also be pressed after a power
failure and after having re-inserted the water
reservoir.
If it has been emptied in the middle of a
programme after«The tank is full, please empty»
message and an acoustic signal has sounded.
In both cases the light of the Start/Pause button
flashes to remind you that the start button needs to be
pressed again.
icon is
10