Sharp CD-BK280V Operation Manual page 31

To interrupt playback:
Press the button on the remote control.
To resume playback from the same point, press the
To stop playback:
Press the ( /RETURN) button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
z If the DISC SKIP button does not allow to rotate the disc tray (you cannot remove
the disc), close and open again the tray.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
The following playback functions are the same as video CD opera-
tions.
Direct Search System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Repeat or Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Programmed Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Notes:
z Whilst in the "VCD ON" state, you cannot play back audio CDs.
z During playback, you can select another disc by pressing either of the DISC SKIP
button or one of the 1 - 3 buttons on the remote control.
z Whilst the disc is being read ("TOC READ" is displayed), another disc cannot be
selected even if you press the DISC SKIP button or one of the
the remote control.
Caution:
z Do not place two CDs in one disc tray.
z Do not push the disc tray whilst it is moving.
z Do not turn the disc tray by hand. This may cause malfunctions.
z If the power fails whilst the tray is open, wait until the power is restored.
z If the disc tray is stopped forcibly, "ER-CD10" will appear in the display and the unit
will not function. If this occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
z If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
„ To locate the beginning of a track
/SELECT/RESUME button.
To move to the beginning of the next track:
Press the
To restart the track being played:
Press the
Notes:
z You can locate the beginning of a track on a single disc only.
z The
PREV. or NEXT
beginning of a track.
Page
„ To locate the desired portion
For fast forward:
Press and hold down the
For fast reverse:
1 - 3 buttons on
Press and hold down the
Notes:
z Normal playback will resume when the
button is released.
z The or
tion.
PRESET button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
PRESET button repeatedly until the
desired track number appears.
PRESET button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
PRESET
the desired track number appears.
button on the remote control allows you to locate the
PRESET button during playback.
PRESET button during playback.
PRESET
button on the remote control allows you to locate the desired por-
01/5/28 CD-BK280V(X)E3.fm
CD-BK280V
button repeatedly until
or PRESET
ENGLISH E-30