Image Shape; Adjusting The Front Feet - Epson PowerLite EB-800F User Manual

13. Enter the IP address for the Internet time server you want to use and select OK.
14. Select Set and press
15. Press Menu or Esc to exit the menus.
Parent topic:

Image Shape

You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality. After correction, your
image is slightly smaller.
For the best quality images, try to adjust the projector's position to achieve the correct image size and
shape. You cannot correct an image shape using multiple correction methods at the same time.

Adjusting the Front Feet

Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Correcting Image Shape with Arc Correction
Correcting Image Shape with Point Correction
Applying Saved Image Shape Settings
Parent topic:
Adjusting the Front Feet
If you are projecting from a table or other flat surface, you can adjust the image using the projector's
adjustable feet. To adjust the image height, set the projector higher or lower while keeping it level and
parallel to the screen.
1. Turn on the projector and display an image.
Enter.
Using Basic Projector Features
Using Basic Projector Features
100