Kenwood DPX-4010 Instruction Manual page 36

Troubleshoot ing Guide
The follow ing messages are displayed w hen certain problems are occurring in your system. Take the recommended
actions.
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
EJECT
]
Load the disc magazine properly.
No disc has been loaded in the disc magazine.
No Disc
]
Load a disc into the disc magazine.
No disc has been loaded in the disc magazine.
Error 04
]
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-dow n. The CD is scratched a lot.
]
Clean the CD and load it correctly.
Nothing has been recorded on the M D.
Blank
]
The next M D w ill automatically be played.
No tracks are recorded on the M D, although it has a title.
No Track
]
The next M D w ill automatically be played.
The unit is malfunctioning for some reason.
Error 77
]
Press the reset button on the unit. If the "Error 77" code does not disappear, consult your nearest service center.
Something is w rong w ith the disc magazine. Or the unit is malfunctioning for some reason.
Error 99
]
Check the disc magazine. And then, press the reset button on the unit.
If the "Error 99" code does not disappear, consult your nearest service center.
The protective circuit in the unit activates w hen the temperature inside the automatic disc changer exceeds 60°C (140°F),
Hold
stopping all operation.
]
Cool dow n the unit by opening the w indow s or turning on the air conditioner. As the temperature falls below 60°C (140°F), the
disc w ill start playing again.
An attempt w as made to display the track/disc title of the CD during play, but the CD has no texts.
No Text
An attempt w as made to display the track/disc title of the M D disc during play, but the M D has no titles.
No Title
• An attempt w as made to display the name of the station being received but it w as not set in memory.
No Name
• An attempt w as made to display the name of the disc being played but it w as not set in memory.
• An attempt w as made to display the station name/disc name after the battery had been removed for a long period.
The tape player is malfunctioning.
]
Eject the tape and try inserting it again.
Contact the Kenw ood dealer if this indicator continues blinking or the tape cannot be ejected.
The CD player is malfunctioning.
]
Eject the CD and try inserting it again.
Contact the Kenw ood dealer if this indicator continues blinking or the CD cannot be ejected.
— 36 —