To Change Or Delete A Title Name - Kenwood CD-224M Instruction Manual

22
Preparation

To change or delete a title name

1
Perform steps 1 and 2 of "Assigning Title
Names".
2
Change or delete characters one by one.
Change
Deletion
Downloaded from: http://www.usersmanualguide.com/
÷ Close the door panel.
1 Select overw rite or insert mode.
IN SERT
2 M ove the cursor to the desired char-
acter (to be changed).
1 ¡
CURSOR
L R
3 Select a character.
CHARACTER/ SEARCH
4 ¢
DOW N UP
Press until the character to be entered
comes to the position of the flashing
cursor.
4 Set the selected character.
SET
1 M ove the cursor to the desired char-
acter (to be deleted).
1 ¡
CURSOR
L R
2 Press the DELETE key.
DELETE/
CLEAR
0
: Keys and controls used in the operations described on this page.
÷ Call the disc to be changed.
÷ Deletion mode is cancelled w hen the M ODE key is pressed.
)
£
S O
+ M ove w ith the 1 ¡ keys =
÷ If the title to be changed is too long to be displayed on the display
section, press the 1 or ¡ key to scroll the display so that the
characters hidden until then appear.
S O
÷ The characters also can be selected w ith the DISC SKIP knob on the
main unit. Turn the knob until the character to be entered comes to the
position of the flashing cursor.
÷ When a title name is to be deleted, delete all characters one by one.
Registration of Title Name
= >
N E B O D Y C T
= >
N E B O D Y C T
CD-2 2 4 M / DPF-J5 0 1 0 (En)
Z B A C
L N M O
Flashing cursor