Battery Pack; Open The Battery Compartment Of Flystick3 - Art ARTTRACK1 System User Manual

Moving left creates negative x values, moving right positive x values.
Moving down creates negative y values, moving up positive y values.
Full extension into any direction creates values of 1.0 or -1.0.
The Flystick3 device provides all functions (buttons, trigger and joystick) simultaneously.
In case you need to carry out a factory reset for the Flystick3 you will find the reset button
just on top of the charging jack. You may use a paper clip to press the reset button.
Data output The output data consists of:
position and orientation of the Flystick,
status of buttons and joystick,
number of used Flysticks.
Please refer to chapter B on page 250 for more information about the format of the output
data.

6.2.2 Battery pack

Inserting the battery For inserting the battery into the Flystick3, you have to take off
the back cover completely.
Therefore, loosen the four screws using the 2.5mm hexagon key and remove the back
cover.
Figure 6.7: Open the battery compartment of Flystick3
6.2 Flystick3
77