8
DTrack2
frontend software
8.5 Menu Settings
8.5.1 Cameras Settings
This dialogue (see figure 8.11 on page 146) shows a list of all cameras currently con-
nected to the system as well as all cameras that have been removed since the last valid
room calibration. It allows changes of all camera specific settings (e.g. flash intensity,
camera orientation, syncgroup assignment, etc.). Here you can also toggle
flash
in order to synchronize an active target.
146
Settings
Cameras
Synccard
Inertial Sensor
ART Radio Info
Tracking
Body Administration
Output
Fingertracking
Flystick
Measurement Tool
Controller
Cascaded System
Table 8.7: Menu
Figure 8.11: Camera Settings - All Cameras Tab
Shortcut
F7
F8
F9
Settings
modulated