York MILLENNIUM ND360 Technical Manual page 6

628767-YTG-C-0910
The Installer Shall:
Furnish condensing units in accordance with the
performance schedules shown on the plans. Install each unit
as shown on the plans in accordance with the manufacturer's
recommendations and all applicable national and local
codes.
Unit Operating Characteristics
Unit shall be capable of starting and running at 125º F
outdoor temperature, exceeding maximum load criteria ARI
Standard 360. The compressor, with standard controls, shall
be capable of operation down to 40º F outdoor temperature.
6
Electrical Requirements
All unit wiring shall enter unit cabinet at a single factory
provided location to minimize cabinet penetrations and avoid
unit field modifications.
Each Unit Shall Include The Following Accessories:
• "Suspension kit
• "Return air grille
• "Hot water coil
• "Steam coil
• "Decorative base
• Metal skid
• "Wood skid
Johnson Controls Unitary Products