Advertisement
Step 3. Mount Type should be Equatorial GoTo
(German) or Alt-Az. GoTo (only for iEQ45 Pro
AA mode), Scope Type should be
iOptron iEQ45 & 8406 for iEQ45 w/8406
iOptron SmartEQ/iEQ/ZEQ & 8407/8 for
iEQ30/45
w/8407,
SmartEQ/SmartEQ Pro
iOptron CEM/iEQPro /AZ mount Pro for
CEM60/CEM60EC, CEM25/CEM25EC,
iEQ30 Pro/iEQ45 Pro, Cube II, Cube
Pro w/8408, and SmartEQ Pro +.
Step 4. Turn off Auto-Detect SkyFi. Change the
IP Address to 10.10.100.254 and Port Number
to 8899. Click Done.
This procedure only needs to be performed
once unless you have changed settings of your
StarFi.
Then click Scope and Connect to connect the
mount.
ZEQ25,
and
3. Currently Supported Software:
(1) Microsoft Windows Platform (Windows
XP, Windows Vista, Windows 7, Windows 8,
Windows 8.1, Windows 10, Windows Server
2003, Windows Server 2008, Windows Server
2008 R2, Windows Server 2012, Windows
Server 2012 R2):
(1.1) For iOptron CEM60/CEM60-EC, iEQ45/30
Pro, CEM25/CEM25EC, Cube II, CubePro
w/8408 and SmartEQ Pro+
Using the iOptron Commander and ASCOM
Driver 4.0 or later version to connect your PC to
the telescope mount.
(1.2) For iOptron iEQ45 w/8406HC, iEQ45/30
w/8407 HC, ZEQ25GT and SmartEQ/SmartEQ
Pro
Using the iOptron Commander and ASCOM
Driver 3.1 or later version for 2013 and earlier
products to connect your PC to the telescope
mount.
Advertisement
