Introduction - Fluke FTK200 User Manual

Introduction

The FTK200 Optical Fiber Test Kit is used to measure
optical power and optical power loss at 850 nm, 1300 nm,
1310 nm, and 1550 nm. This test kit includes the FM150
Fiber Meter (also referred to as "the meter"), which has
the following features:
•
Measures optical power loss of multimode or
singlemode fibers.
•
Measures output power from optical sources such as
network interface cards or optical test equipment.
•
Displays output power measurements in dBm or µW.
•
Operates for up to 30 hours on a single 9 V alkaline
battery. Automatic power-down feature helps
conserve battery power.
Optical Fiber Test Kit
•
Displays remaining battery life.
•
Designed to use the optional ToolPak™ Meter
Hanging Kit from Fluke.
•
Saves up to 500 measurements for each wavelength.
•
Serial port lets you print measurements on a serial
printer or upload measurements to a PC.
•
LinkWare™ software runs on a PC to let you upload
measurements from the meter, view measurements,
add header information to create test reports, and
save and print reports.
1