Kia niro eco electric 2020 Owner's Manual page 211

Features of your vehicle
Press brake pedal to start vehicle
This warning message is displayed if
the POWER button changes to the
ACC position twice by pressing the
button repeatedly without depress -
ing the brake pedal.
You can start the vehicle by
depressing the brake pedal.
Key not in vehicle
This warning message is displayed if
the smart key is not in the vehicle
when you press the POWER button.
When attempting to start the vehi -
cle, always have the smart key with
you.
Key not detected
This warning message is displayed if
the smart key is not detected when
you press the POWER button.
Press POWER button again
This message is displayed if you
were unable to start the vehicle
when the POWER button was
pressed.
If this occurs, attempt to start the
vehicle by pressing the POWER but -
ton again.
If the warning message appears
each time you press the POWER
button, have your vehicle inspected
by an authorized Kia dealer.
5 66
Press POWER button with key
This warning message is displayed if
you press the POWER button while
the warning message "Key not
detected" is displayed.
Check BRAKE SWITCH fuse
This warning message is displayed if
the brake switch fuse is discon -
nected.
You need to replace the fuse with a
new one before starting the vehicle.
If that is not possible, you can start
the vehicle by pressing the POWER
button for 10 seconds in the ACC
position.
Shift to P to start vehicle
This warning message is displayed if
you try to start the vehicle without
shifting to the P (Park) position.
Shift to P
This warning message is displayed if
you try to turn off the vehicle with
the gear in the N (Neutral) position.
At this time, the POWER button
changes to the ACC position (If you
press the POWER button once more,
it will turn to the ON position).
LCD displays