Communication Level - ABB Endura AZ40 Operating Instructions Manual

3 Communication level

IMPORTANT (NOTE) Communication level menus are
enabled only if an optional communications module is
fitted and the parameters displayed are specific to the
type of module fitted. For example, if a MODBUS
module is fitted, MODBUS parameters are enabled, but
Ethernet parameters are neither enabled nor displayed.
The Communication level is accessed from the Advanced
access level. To access the communication level and the
configuration parameters for the communications module
fitted:
1. Press the key (below the
page).
AZ40
Oxygen
Combustibles
25.0
%
Outlet Temp. Efficiency
97
°C
The Operator menu is displayed:
AZ40
Oxygen
Combustibles
25.0
%
Operator Pages
Data Views
97
Logs
Alarm Acknowledge
°C
Autoscroll
Enter Configuration
2. Press the key to scroll to Enter Configuration and
press the key.
The Access Level page is displayed:
Access Level
Read Only
Calibrate
Advanced
Service
Back
3. Use the key to scroll to Advanced and press the
key (below the Select prompt).
icon on any Operator
2015-04-09
14:33:12
0.06
%
0.0
%
CAL
2015-04-09
14:33:12
0.06
%
ency
0.0
%
CAL
Select
Endura AZ40 | Oxygen and carbon monoxide equivalent (COe) analyzer | COM/AZ40/MOD–EN Rev. A
4. Use the and
level:
Menu
Communication
Exit
key (below the Select prompt).
5. Press the
The Communication page appropriate to the
communication module fitted is displayed:
Communication
MODBUS
Back
MODBUS – refer to Section 4, page 8.
keys to scroll to the Communication
Select
Select
7