Lexus KMA10 Series Dismantling Manual page 31

SEPARATE NO. 1 DISCHARGE HOSE SUB-ASSEMBLY
Remove the bolt and No. 1 discharge hose sub-
assembly.
SEPARATE NO. 2 DISCHARGE HOSE SUB-ASSEMBLY
Remove the bolt and No. 2 discharge hose sub-
assembly.
SEPARATE WIRE HARNESS
CAUTION:
Make sure to wear insulating gloves.
NOTICE:
Insulate the disconnected terminals and connector with insulating tape.
Disengage the 2 caps.
Slide the green-colored lock of the connectors as
shown in the illustration to release it and disconnect
the connector.
27