Attaching The Rubber Feet; Main Specifications - Boss HYBRID DRIVE OD-200 Owner's Manual

Attaching the Rubber Feet

You can attach the rubber feet (included) if necessary.
Attach them in the locations shown in the illustration.
* Using the unit without rubber feet may damage the floor.

Main Specifications

BOSS OD-200: HYBRID DRIVE
Alkaline battery (AA, LR6) x 3,
Power Supply
AC adaptor (sold separately)
Current Draw
220 mA
Expected Battery
Alkaline: Approx. 6 Hours
Life Under
* These figures will vary depending on the actual
Continuous Use
conditions of use.
101 (W) x 138 (D) x 63 (H) mm / 4 (W) x 5-7/16 (D) x 2-1/2
(H) inches
Dimensions
101 (W) x 138 (D) x 65 (H) mm / 4 (W) x 5-7/16 (D) x 2-9/16
(H) inches (including rubber foot)
Weight
670 g / 1 lb 8 oz (including batteries)
Owner's Manual
Leaflet "USING THE UNIT SAFELY"
Accessories
Alkaline battery (AA, LR6) x 3
Rubber foot x 4
AC adaptor: PSA-S series
Footswitch: FS-5U
Options
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35
* This document explains the specifications of the product at the time that
the document was issued. For the latest information, refer to the Roland
website.
Appendix
15