Getting Started; Supplied Accessories; Notes On The Transportation Pad - Yamaha CDR-S1000 Owner's Manual

After unpacking, check that the following parts are
contained.
• Remote Control
TRACK NO.
REC MODE
EFFECT REPEAT RANDOM CLEAR
1
4
7
FINALIZE
SEARCH

Notes on the transportation pad

Before using the unit
This unit is shipped with a transportation pad inserted in
the disc tray to prevent impact to the internal mechanism
that could occur during transportation. Before using this
unit, press POWER on the front panel to turn the power
OPEN/CLOSE (OPEN/CLOSE on the
on, press
remote) to open the disc tray, and remove the pad.
Storing the transportation pad
It is recommended to use the transportation pad whenever
the unit is moved. Therefore, store the transportation pad
for future transportation of the unit.

Supplied accessories

OPEN/
WRITE DIMMER DISPLAY CLOSE
PROG
2 3 INDEX
5 6 +10
8 9 0
ERASE REC REC MUTE
SKIP
STOP PAUSE PLAY

GETTING STARTED

• Batteries (size AA, UM-3, R6) (2)
• RCA Pin Cables (2)
• Optical Fiber Cable
Installing the transportation pad
1
Press POWER on the front panel to turn the power
on.
2
OPEN/CLOSE (OPEN/CLOSE on the
Press
remote) to open the disc tray.
3
Place the transportation pad in the disc tray.
4
Press OPEN/CLOSE (OPEN/CLOSE on the
remote) to close the disc tray.
• If a portion of the transportation pad remains out of
the unit, push gently to slide it into the unit.
5
Press POWER on the front panel to turn the power
off.
E-4