Cd Synchronized Recording - Yamaha CDC-565 Owner's Manual

CD SYNCHRONIZED RECORDING

This unit can make a tape deck's recording synchronized with CD play automatically. With this function, you can record a CD on
tape very easily and more precisely.
This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit's
remote control transmitter at the same time.
CDC-765, CDC-665
3
SYNCHRO
1
4
4
7
DISC SCAN
1
–
OUTPUT LEVEL
1
Select a disc.
2
Load a tape on the tape deck.
* CDC-765 and CDC-665 only
The peak level searching function of this unit is
useful for adjusting recording level on the tape deck.
(Refer to page 23.)
3
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit flashes on
and off.
OPEN/
DIMMER TIME
CLOSE
TAPE CLEAR PROG
2 3
INDEX
+
5 6 I0
8 9 0
MODE REPEAT RANDOM
DISC SKIP SEARCH
4
+
SKIP
STOP PAUSE PLAY 5
DISC SKIP
SYNCHRO
CDC-565
3
SYNCHRO
1
4
4
7
DISC SCAN
1
DISC SKIP
4
If desired, select the track to be recorded first.
5
5
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
6
If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3–5 again.
To cancel this function
Press the STOP button.
Notes
To finish or stop the recording, press the "STOP" button on
the tape deck.
Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
page 14–15 for the programming procedure.)
CDC-765 and CDC-665 only
This function can also be used together with the automatic
tape-programming function. (Refer to page 20–22.)
OPEN/
DIMMER TIME
CLOSE
CLEAR PROG
2 3
INDEX
+
5 6 I0
8 9 0
MODE REPEAT RANDOM
4
SEARCH
SKIP
STOP PAUSE PLAY 5
SKIP
or
PLAY
19