Chapter 2 Utg9000C-Ii Series Introduction; Main Features; Output Characteristics - UNI-T UTG9000C-II Series User Manual

Chapter 2 UTG9000C-II Series Introduction

The UTG9000C-II Series Function/Arbitrary Waveform Generator uses the
direct digital synthesis technology, which can generate the accurate, stable,
pure and low-distortion waveform output, and the resolution is as low as 1μHz.
It is an economical, high-performance and multifunctional function/arbitrary
waveform generator. With the convenient operation interface, excellent
technical indicators and humanized graphic display, this multi-purpose
equipment can meet your learning and testing requirements and improve
work efficiency.

2.1 Main Features

► 5MHz/2MHz sine wave and pulse wave output, full-band resolution of 1μHz
► Built-in power amplifier with full power bandwidth up to 200kHz, maximum
output power is 4W
► DDS implementation with 125MSa/s sampling rate and 14bits vertical
resolution
► 6-digit high precision frequency meter compatible with TTL level signal
► 20 sets of non-volatile digital arbitrary waveform memory
► Easy-to use modulation types: AM, FM
► Support frequency sweeping output
► Powerful upper computer software
► Ultra-black EBTN LCD display
► Standard configuration interface: USB Device
► Internal/external modulation, internal/external trigger

2.2 Output Characteristics

Channel CHA
Amplitude Range 1mVpp ~ 10Vpp (50Ω)
Sine wave, pulse wave, ramp wave,
Waveform
arbitrary wave, noise, DC
Modulation AM, FM
Frequency Sweep Log, Line
UTG9000C-II User Manual