Table of Contents
Advertisement
Checking the Package Contents
Check your package to make sure it has the following items.
Remote Control
When finding it difficult to fit this unit onto the shelf, remove the side panels after removing the screws tightened on the side panels. Put this
sticker to cover the screw holes after tearing off the back side of the sticker.
Installing Batteries in the Remote Control
Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity illustrations (+ and –) inside the
battery compartment.
Change the batteries periodically. Do not use old batteries together with new ones.
Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different
types of batteries may have the same shape and color.
Reset button
Using the Remote Control
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main
unit to operate. When the sensor is covered or there is a large object between the remote control and the main unit, the sensor cannot receive
signals. The sensor may not be able to receive signals properly when it is exposed to direct sunlight or a strong artificial light (such as a
fluorescent or strobe light). In this case, change the direction of the light or reposition the main unit to avoid direct lighting.
INPUT
INPUT MODE
NATURAL SOUND AV RECEIVER RX–V3000RDS
STANDBY
/ON
SPEAKERS
PRESET
TUNING
EFFECT
A
B
SOURCE
/TUNING
FM/AM
MEMORY
MODE
RDS MODE
DVD
MD/TAPE
SILENT
D-TV/LD
CD-R
EDIT
MAN'L/AUTO FM AUTO/NAN'L MONO
CABLE
TUNER
S VIDEO
VIDEO
L
AUDIO
SAT
CD
BASS
PROCESSOR
6CH
DSP
EXTENSION
DIRECT
VCR 1
PHONO
INPUT
PROGRAM
PHONES
VCR 2/DVR
VIDEO AUX
VIDEO AUX
BASS
TREBLE
REC OUT
Approximately 6m
30
30
(20 feet)
Getting Started
Alkaline Batteries (3) (LR6)
Quick Reference Card
Remote Control
TUNER
CD button (CD area)
Infrared window
POWER
CLEAR
LEARN
RE-NAME
MACRO
(Set 10KEY)
DISPLAY
TRANSMIT
MACRO ON/OFF
SEARCH
STANDBY
Skip Search
SYSTEM POWER
A
button
POWER
STOP
PLAY
Input buttons
PAUSE (/Stop)
Preset number 1 to 8
Numeric buttons 1 to 9
6CH INPUT
Display
Preset group A through E from left.
CLEAR
Source selector
Preset group A/B/C/D/E
Numeric button +10
Numeric button 0
LIGHT
DISC +/– (Disc Skip)
Operational buttons
Preset +/–
TV VOL +/–, TV INPUT, and TV MUTE
10 KEY/DSP
function if you have set up the
INDEX
Sound program selector/
manufacturer code for the TV Area.
(Set 10KEY)
Numeric buttons
MUTE
MD/TAPE button (MD area)
CD-R button (CD-R area)
Operational buttons
VOLUME +/–
EFFECT
LEVEL
PARAMETER/SET MENU
REC/PAUSE
REC/PAUSE
ON SCREEN
Cursor buttons
POWER
POWER
SLEEP
TEST
DISPLAY
DISPLAY
SEARCH
SEARCH
SOUND
Skip Search
Skip Search
Cover
STOP
STOP
PLAY
PLAY
PAUSE
PAUSE
Numeric buttons 1 to 9
Numeric buttons 1 to 9
Numeric button +10
Numeric button +10
Numeric button 0
Numeric button 0
TV VOL +/–, TV INPUT, and TV MUTE
TV VOL +/–, TV INPUT, and TV MUTE
(Set 10KEY)
function if you have set up the
INDEX
function if you have set up the
manufacturer code for the TV Area.
(Set 10KEY)
manufacturer code for the TV Area.
V655120
Quick Reference Guide
About changing batteries
As the batteries wear out, the operating range of the remote control decreases and
the TRANSMIT indicator does not flash or its light becomes dim. When you
notice any of these conditions, change all of the batteries.
Notes:
• If the remote control is without batteries for more than 20 minutes, or if worn out
batteries remain in the unit, the contents of the memory may be cleared.
If the memory is cleared, insert new batteries and reprogram any functions that may have
been cleared.
• After you insert new batteries, be sure to push RESET in the battery compartment using
a ball point pen or similar object before using the remote control. (This does not clear the
contents of the memory.)
About handling the remote control
VOLUME
Handle the remote control with care.
Do not spill water or other liquids on the remote control.
Do not drop the remote control.
EON
PTY SEEK
MODE
START
R
OPTICAL
Do not leave or store the remote control in the following types of conditions:
• high humidity or temperature such as near a heater, stove or bath; or
• dusty places; or
• in places subject to extremely low temperatures.
AM Loop Antenna
Power Cord
FM Antenna
R
L
Side Panel Sticker
3
Advertisement
Chapters
Table of Contents
