Saving And Recalling The System Settings (System Memory); Saving The Current System Settings - Yamaha RX-V1800 Owner's Manual

Saving and recalling the system settings (SYSTEM MEMORY)

Use this feature to save up to six of your favorite settings
that can be easily recalled when needed. You can save the
following system setting parameters:
Saved parameters
"BASIC MENU" parameters
(except "TEST TONE")
"VOLUME MENU" parameters
(except "INIT. VOL.")
"SOUND MENU" parameters*
(except "EXTD SUR.")
"DISPLAY SET" parameters
(except "SHORT MESSAGE")
"VIDEO SET" parameters
Currently selected sound field program
(or the Pure Direct mode)
Sound field parameter settings
Tonal quality control settings*
* The settings of "DYNAMIC RANGE", "LFE LEVEL", and
the tonal quality control for headphones are not saved.

Saving the current system settings

Before performing the following operations, set the operation
mode selector on the remote control to C AMP.
■ Saving by the M SYSTEM MEMORY
buttons
You can save the system settings stored in "MEMORY1"
to "MEMORY4" by pressing the corresponding
M SYSTEM MEMORY buttons.
Press and hold one of the MSYSTEM MEMORY
buttons on the remote control for 4 seconds.
"MEMORY 1 SAVE Done" (example) appears in the front
panel display, and then this unit saves the current system
setting to the corresponding memory number.
SYSTEM MEMORY
1 2
Note
System settings are already saved in the selected memory
number, this unit overwrites the old system settings.
96
En
Page
80
84
85
91
92
46
67
52
3 4
■ Saving by the SET MENU operation
You can save the system settings stored in "MEMORY1"
to "MEMORY6" by using the "SYSTEM MEMORY"
menu in "SET MENU".
Press F SET MENU on the remote control.
1
The top "SET MENU" display appears in the OSD.
SET MENU
;AUTO SETUP
.
;MANUAL SETUP
;SYSTEM MEMORY
;SIGNAL INFO
[ ]/[ ]:
[ENTER]:
2
Press 3n to select "SYSTEM MEMORY" and
then press 3 ENTER.
The "SYSTEM MEMORY" menu appears in the
OSD.
SYSTEM MEMORY
. 1 LOAD
2 SAVE
[ ]/[ ]:
[ENTER]:
3
Press 3n to select "SAVE" and then press
3 ENTER.
The following menu appears in the OSD.
SYSTEM MEMORY
. SAVE;;;;;;;CURRENT
Church in Freiburg
ADAPTIVE DRC;;AUTO
EQUALIZER;;;;;;PEQ
YPAO PEQ;;;NATURAL
[p]/[[]:
[ENTER]:
Current system parameters
UP/DOWN
Enter
UP/DOWN
Enter
Select
Return