Impedance Selector Switch - Yamaha RX-V1200 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for RX-V1200:
Table of Contents

Advertisement

I IMPEDANCE SELECTOR switch
WARNING
Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit
may be damaged.
If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR
switch may not be fully slid to either position. If so, slide the switch to either position fully when this unit is in the
standby mode.
Select the left and right position according to the impedance of the speakers in your system. Be sure to move this switch
only when this unit is in the standby mode.
IMPEDANCE
SELECTOR
IMPEDANCE SELECTOR
switch
SET BEFORE POWER ON
MAIN A OR B:
4ΩMIN. /SPEAKER
A+B:
8ΩMIN. /SPEAKER
:
6ΩMIN. /SPEAKER
CENTER
REAR CENTER :
6ΩMIN. /SPEAKER
:
6ΩMIN. /SPEAKER
REAR
MAIN A OR B:
8ΩMIN. /SPEAKER
A+B:
16ΩMIN. /SPEAKER
:
8ΩMIN. /SPEAKER
CENTER
REAR CENTER :
8ΩMIN. /SPEAKER
REAR
:
8ΩMIN. /SPEAKER
AC IN
IMPEDANCE SELECTOR
SET BEFORE POWER ON
AC OUTLETS
MAIN A OR B:
4ΩMIN. /SPEAKER
A+B:
8ΩMIN. /SPEAKER
CENTER
:
6ΩMIN. /SPEAKER
REAR CENTER :
6ΩMIN. /SPEAKER
REAR
:
6ΩMIN. /SPEAKER
MAIN A OR B:
8ΩMIN. /SPEAKER
A+B:
16ΩMIN. /SPEAKER
:
CENTER
8ΩMIN. /SPEAKER
REAR CENTER :
8ΩMIN. /SPEAKER
:
REAR
8ΩMIN. /SPEAKER
(U.S.A. model)
Switch
Speaker
position
If you use one set of main speakers, the impedance of
each speaker must be 4 Ω or higher.
Main
If you use two sets of main speakers, the impedance of
each speaker must be 8 Ω or higher.
The impedance must be 6 Ω or higher.
Left
Center
The impedance must be 6 Ω or higher.
Rear
Center
The impedance of each speaker must be 6 Ω or higher.
Rear
If you use one set of main speakers, the impedance of
each speaker must be 8 Ω or higher.
Main
If you use two sets of main speakers, the impedance of
each speaker must be 16 Ω or higher.
[Canada model only]
The impedance of each speaker must be 8 Ω or higher.
Right
The impedance must be 8 Ω or higher.
Center
The impedance must be 8 Ω or higher.
Rear
Center
The impedance of each speaker must be 8 Ω or higher.
Rear
SPEAKER SETUP
Impedance level
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htr-5490

Table of Contents