Selecting A Sound Field Program - Yamaha DSP-AX620 Owner's Manual

BASIC PLAYBACK

Selecting a Sound Field Program

You can enhance your listening experience by selecting a
DSP program. For details about each program, see
"SOUND FIELD PROGRAM".
I On the remote control
1
2
1
Press DSP.
The indicator lights up for
about 3 seconds.
y
• If the selector dial is set to the DSP/TUN position, skip this
step.
2
Use the numeric buttons to select the
desired program before the indicator goes
off.
• For example, to select the sub-program
"SPECTACLE", press MOVIE THEATER 1
repeatedly.
• The name of the selected program appears on the
front panel display and on the video monitor.
Program group
V-AUX VCR2/DVR VCR 1
DIGITAL
MOVIE THEATER 1
DSP
Program name (sub-program)
28
A/B/C/D/E
D-TV/CBL DVD MD/CD-R TUNER CD PHONO
VOLUME
I On the front panel
D I G I T A L
SURROUND
STANDBY
/ON
BASS BASS TREBLE SPEAKERS
EXTENSION
A B
SET MENU
+ +
ON OFF – – ON OFF
PHONES S VIDEO
SILENT
1
Press DSP PROGRAM.
2
Turn the multi jog knob to
select the program.
The name of the selected
program appears on the front
panel display and on the video
monitor.
Notes
• Choose a DSP program based on your listening preference, and
not on the name of the program. The acoustics of your listening
room affect the DSP program. Minimize the sound reflections
in your room to maximize the effect created by the program.
• When you select an input source, this unit automatically selects
the last DSP program used with that source.
• When you set this unit in the standby mode, the current source
and DSP program are memorized and are automatically
selected when you turn on the power again.
• If a Dolby Digital or DTS signal is input when the input mode
is set to AUTO, the DSP program automatically switches to the
appropriate decoding program.
• When a monaural source is being played with PRO LOGIC/
NORMAL or PRO LOGIC/ENHANCED, no sound will be
heard from the main speakers and the rear speakers. Sound can
only be heard from the center speaker. However, if "1A
CENTER SP" on the SET MENU is set to NONE, the center
channel sound is output from the main speakers.
• When a source connected to the 6CH INPUT jacks of this unit
is selected, the digital sound field processor cannot be used.
• When 96-kHz sampling digital signals are input to this unit, the
DSP program cannot be selected. In this case, the sound is
reproduced as normal 2-channel stereo.
VOLUME
D I G I T A L
INPUT MODE
INPUT
DSP
PROGRAM EFFECT
– +
VIDEO L AUDIO R OPTICAL
VIDEO AUX
2 1
DSP
PROGRAM
– +
6CH INPUT