Bridge Mode Hookup - Yamaha CP2000 Owner's Manual

6
Chapter 2—Hookup Examples

Bridge Mode Hookup

In BRIDGE mode, the L and R channels are combined to form a massive 2000 watt sin-
gle-channel amplifier. The input signal is sourced from the Channel L inputs. The fol-
lowing hookup example shows how the CP2000 can be used in BRIDGE mode.
STEREO
BRIDGE
PARALLEL
INPUT
CHANNEL R
STEREO
BRIDGE
PARALLEL
2 1
OFF
3
YAMAHA
SPEAKER PROCESSING
MONO OUT
Mixer
BRIDGE Notes:
• The input source must be connected to the Channel L inputs.
• The volume level is set by using the Channel L LEVEL control.
• The Channel R inputs and LEVEL control are inactive.
• The speakers must be connected to the 5-way binding posts.
• The 1/4" phone jack outputs must not be used.
CP2000—Owner's Manual
CHANNEL L
(BRIDGE)
NEUTRIK
2 1
ON
3
2 1 1
(–) BRIDGE (+)
CHANNEL R CHANNEL L
SPEAKERS
Total impedance:
4 min (2000 W)
8 (1300 W)
2