Yamaha CS6R Owner's Manual page 16

1 VOICE panel
This shows the name and instrument category of the voice. You can also rename your
edited voice and change the instrument category from the "Voice Category" pull-down
menu.
n
Voice names can consist of up to 10 characters.
2 QUICK EDIT panel
This gives you access to the volume, pan, filter and envelope generator controls. The
specific parameters for these controls can be found in the "QUICK EDIT/SCENE
CONTROL" dialog, opened by clicking the [DETAIL] button above the Keyboard area at the
bottom of the window.
n
The "SUSTAIN" and "RELEASE" knobs are not available for Drum Voices.
3 PITCH BEND settings
Use these "LOWER" knob to set the lowest point in the pitch bend wheel's range and the
"UPPER" knob to set the highest point.
4 PORTAMENTO unit
Use the switch to enable/disable portamento and the "TIME" knob to specify the
portamento time. Click on the text box and select the portamento mode.
n
The "PORTAMENTO" unit is not available for Drum Voices.
5 ARPEGGIO unit
Use the switch to enable/disable the arpeggiator and the "TEMPO" knob to specify the
arpeggiator speed. Click on the text box below the switch to select the arpeggiator mode .
Click on the text box to the left of the switch to select the arpeggio type. The specific
parameters for the arpeggiator can be found in the "ARPEGGIO" dialog, opened by
clicking the [DETAIL] button.
6 [CTRL SET/COM LFO] button
Click this to open the "CONTROLLER SET /COMMON LFO" dialog. In the top panel, you
can specify the parameters for all controllers such as the pitch bend and modulation
wheels. The bottom panel lets you specify the parameters for the Common LFO.
n
The "COMMON LFO" panel is not available for Drum Voices. Also, the "ELEMENT" switches in the
"CONTROLLER SET" panel are not available for Drum Voices.
16