Page 1
Bedienungsanleitung Mode d’emploi Manual de instrucciónes Thank you for choosing the YAMAHA speaker system. In order to take maximum advantage of the speaker’s features and ensure maximum performance and longevity, please read this manual carefully before using the speaker system.
– Use the stand at a maximum height of 140 cm. • If you use a metal socket of the SW115V/SW118V sub- woofer to allow mounting of a satellite speaker, use a pole shorter than 90cm with an outer diameter of 35mm.
Page 3
• Use only Neutrik NL4FC plugs for connecting Speakon con- nectors. Yamaha cannot be held responsible for damage caused by improper use or modifications to the device. * Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the prod- uct during operation.
8-ohm speakers have a total impedance of 4 ohms. The S112V/S115V/SM10V/SM12V/ SM15V/SW115V/SW118V are 8-ohm speakers, and two of these can safely be paralleled on one output. The S215V/SW218V, however, has an impedance of 4 ohms and should not be parallel-connected with another S215V/SW218V or any other model.
Page 5
Adding subwoofers to speaker systems like the one shown in the diagram can provide superior dynamic range and overall sound quality. After inputting the line-level audio from the preamplifier or mixing console into the Yamaha P-series power amplifiers (P7000S/P5000S/P3500S/P2500S), the separate frequency bands are outputted from the amplifiers.
SW218V Specifications and descriptions in this owner’s manual are for 18" cone × 2 information 30Hz-2kHz Yamaha Corp. reserves the right 600W to change or modify products or 1200W specifications at any time with- 2400W out prior notice. Since specifica- 4Ω...
Page 10
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante.