Yamaha RY9 Owner's Manual page 55

ENTERING REALTIME RECORD MODE - From within Song Record Standby
Mode, first, press [-1] or [+1] to select the pattern number that you want to
be the first part in the song. Then, simply pressing [PLAY] will initiate the
realtime recording operation. A count-in metronome click will begin (the
number of count-in beats will appear on the screen, and will depend on the
meter of the specified pattern), after which realtime recording will commence.
(To exit Realtime Record Mode, press [STOP], then press [REC] again.)
RECORDING IN REALTIME - Realtime recording is also comprised of two
distinct operations:
1.
Selecting "Next" patterns with [-1] and [+1] which will record as one-
measure song parts in the pattern track as the song plays— reaching
the end when you press [STOP].
2.
Recording chord changes in the chord track with the Chord Assign feature.
After recording the patterns that make up the song, the beat/clock position indicators (i.e., the
inverted triangles in the upper right area of the LCD) will appear, which indicates that the song
contains pattern data.
Pressing [PLAY] to engage realtime recording will erase any existing data.
DELETING A PATTERN - After recording a song, you can go back and delete
a pattern at any time. First, in Song Record Mode, locate the measure of
the pattern you want to delete, by pressing [FWD] and [BWD]. Next, hold
[MODE] and press [PAGE+] once. The word "DEL" (Delete) will appear in the
upper left area of the LCD, and the word "SURE?" will appear in the lower
left area of the LCD. Then, press [ENTER] to delete the pattern. (All parts
which succeed the deleted part will be brought forward by one part each,
thus automatically filling the gap created by the deleted part.)
ACCENT MODE
PATTERN
TOM1
DELETE AUDITION
PAGE
CHORD PAD BANK
0 SONG 1 KIT 2
TOM2 TOM 3
6 PAGE 7 8
BD1 BD 2 SD1
47
EXT IN 3 SYSTEM 4 TEMPO
HH HH
RIDE
CLOSED1 OPEN
MUTE 9 BALANCE 10 TRANS-
POSE
HH
SD 2 CRASH
CLOSED2
5
ENTER
11