Saving And Recalling Custom Panel Setups - Registration Memory; Registering Panel Setups - Registration Memory - Yamaha PortaTone PSR-A1000 Owner's Manual

Saving and Recalling Custom Panel Setups — Registration Memory
Registration Memory is a powerful feature that lets you set up the PSR-A1000 just as you want — selecting specific
voices, styles, effect settings etc. — and save your custom panel setup for future recall. Then, when you need those
settings, simply press the appropriate REGISTRATION MEMORY button.
REGISTRATION MEMORY
FREEZE
Registering Panel Setups — Registration Memory
This shows you how to register your custom panel settings to the REGISTRATION MEMORY buttons. Make all the
settings you want with the panel controls, and Registration Memory will "remember" them for you.
1
Set up the panel controls as desired.
For a list of the settings that can be registered, refer to the separate Data List
(Parameter Chart).
REGISTRATION MEMORY
2
FREEZE
3
Select the desired parameter groups
for the settings you want to register.
You can also use the [DATA ENTRY]
dial to navigate in this display. To
register a parameter group, checkmark
the corresponding box. Groups left
without checkmarks will not be included
in the Registration Memory setting.
This allows you to maintain certain
settings, even when switching among
Registration Memory presets. You can
also use the Freeze function (page 78)
to override the Registration Memory
changes — letting you prevent certain
panel settings from being changed.
Press the desired
E
number button for
ND
registering the settings.
Indicator is green .....The panel setting is registered, but not selected.
Indicator is red .........The panel setting is registered and is currently selected.
Indicator is off..........The panel setting is not registered.
The registrations registered here will be lost when the power is turned off, unless you perform the
Save operation explained on the next page.
76
PSR-A1000
1 2 3 4 5
REGISTRATION MEMORY
FREEZE
MEMORY
MEMORY
F
G
H
I
J
6 7 8
MEMORY
Keep in mind that songs or
styles on disk cannot
registered to Registration
Memory. If you want to
register a disk-based song
or style, copy the relevant
data to "USER" in the
SONG/STYLE display
(page 35) and register the
data separately.
Cancels the registration
and returns to the MAIN
display. You can also use
the [EXIT] button.
Enters a checkmark to the
selected box. You can also
use the [ENTER] button.
Removes the checkmark from
the selected box. You can also
use the [ENTER] button.
Any data that was previ-
ously registered to the
selected REGISTRATION
MEMORY button (indica-
tor is green or red) will be
erased and replaced by
the new settings.