GMC CHEVROLET Equinox 2021 Owner's Manual page 320

Table of Contents

Advertisement

To prevent damage, do not clean the
interior using the following cleaners or
techniques:
Never use a razor or any other sharp
object to remove soil from any interior
surface.
Never use a brush with stiff bristles.
Never rub any surface aggressively or
with too much pressure.
Do not use laundry detergents or
dishwashing soaps with degreasers. For
liquid cleaners, use approximately
20 drops per 3.8 L (1 gal) of water.
A concentrated soap solution will create
streaks and attract dirt. Do not use
solutions that contain strong or
caustic soap.
Do not heavily saturate the upholstery
when cleaning.
Do not use solvents or cleaners containing
solvents.
Interior Glass
To clean, use a terry cloth fabric dampened
with water. Wipe droplets left behind with a
clean dry cloth. If necessary, use a
commercial glass cleaner after cleaning with
plain water.
Caution
To prevent scratching, never use abrasive
cleaners on automotive glass. Abrasive
cleaners or aggressive cleaning may
damage the rear window defogger.
Cleaning the windshield with water during
the first three to six months of ownership
will reduce tendency to fog.
Speaker Covers
Vacuum around a speaker cover gently, so
that the speaker will not be damaged. Clean
spots with water and mild soap.
Coated Moldings
Coated moldings should be cleaned.
When lightly soiled, wipe with a sponge
or soft, lint-free cloth dampened with
water.
When heavily soiled, use warm soapy
water.
Fabric/Carpet/Suede
Start by vacuuming the surface using a soft
brush attachment. If a rotating vacuum
brush attachment is being used, only use it
Vehicle Care
on the floor carpet. Before cleaning, gently
remove as much of the soil as possible:
Gently blot liquids with a paper towel.
Continue blotting until no more soil can
be removed.
For solid soils, remove as much as
possible prior to vacuuming.
To clean:
1. Saturate a clean, lint-free colorfast cloth
with water. Microfiber cloth is
recommended to prevent lint transfer to
the fabric or carpet.
2. Remove excess moisture by gently
wringing until water does not drip from
the cleaning cloth.
3. Start on the outside edge of the soil and
gently rub toward the center. Fold the
cleaning cloth to a clean area frequently
to prevent forcing the soil in to the
fabric.
4. Continue gently rubbing the soiled area
until there is no longer any color
transfer from the soil to the cleaning
cloth.
5. If the soil is not completely removed,
use a mild soap solution followed only
by plain water.
319

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents