GMC CHEVROLET Equinox 2021 Owner's Manual page 139

138 Infotainment System
Set Up My Places. Show My Places on Map
should be on by default. Select and enter
Home and/or Work address and save.
B
Touch (current vehicle position). This
symbol can also be used to set up Home
and Work addresses by touching the
bubbles above it. Touch the pop-up message
that appears. The message will
automatically close after 15 seconds of
inactivity.
To turn off the My Places bubbles, switch
Show My Places on Map to Off.
If the vehicle s system is not signed into a
customized profile, the current location icon
uses a generic symbol. Once signed into a
customized profile, the current location
symbol will show a customized icon. See
Navigation Symbols 0 140.
Touch the drive To Home or drive To Work
pop-up to start either route. Only one will
show if the vehicle is already at Home
or Work.
Map and Navigation Settings
A
Touch while in the map view to display
options. The following may display:
3D Heading Up, 2D Heading Up, 2D North
Show on Map
Traffic Events (available with OnStar
Connected Navigation)
Range Projection (available for Electric
Vehicles)
Settings
Edit Destination (if a route has been set)
Avoid on Route (if a route has been set)
Touch Settings to view Map and Navigation
Settings. The following may display:
Set Up My Places. See Set Up My Places
previously in this section.
Map Preferences
Route Preferences
Navigation Voice Control
Traffic Preferences
Alert Preferences
Manage History
Predictive Navigation: See Predictive
Navigation (If Equipped) previously in
this section.
Map Updates
About
z
To exit a list, touch in the top right
corner to return to the main map view.
Make sure to set up preferences before
setting a destination and starting active
guidance.
Map Preferences
Touch to choose between basic map feature
configurations:
Map Colors
Auto Touch to automatically change
modes based on lighting conditions.
Day (Light)
Night (Dark)
3D Landmark (Default is On) : Touch On or
Off. When turned on, the system will
display all 3D Landmarks on the map
depending on the zoom level.
3D Building (Default is Off) : Touch On or
Off. When turned on, the system will
display all of the possible 3D building shapes
on the map depending on the zoom level.