Yamaha MD4 Owner's Manual page 15

6
Time Counter mode
These indicators show the Time Counter mode.
ELAPSE—This mode shows the time position within a song.
REMAIN—This mode shows the time remaining for a song or when you are recording a new
song, it shows the available time remaining for the song.
TOTAL—This mode shows the time position within the entire disc.
7
Title and function display
Disc titles, song titles, functions, messages, and other information appear here.
8
Time counter
The time counter shows the disc time in minutes, seconds, and frames.
9
Track level meters
These track level meters show group signal levels from –39 dB to –3 dB in 9 steps. A CLIP indi-
cator warns of possible distortion caused by signal clipping. With no disc loaded, the meters
display group signal levels.
0
Stereo level meters
These level meters show the STEREO OUT signal levels from –20 dB to +12 dB in 9 steps.
A
Markers
These indicators show the status of the Start, End, and eight markers in between. When a song
is recorded, Start and End markers are recorded automatically. You can also add up to eight
markers per song while recording is in progress or during subsequent playback. When a song
is positioned on or after a marker (stopped, playing, paused, or recording) that marker flashes.
When the beginning of a song is located, the Start marker flashes. When the end is located, the
End marker flashes.
B
Repeat mode indicators
These indicators show the Repeat modes.
REPEAT 1—The current song is played repeatedly (One Song Repeat).
REPEAT ALL—All songs are played repeatedly (All Song Repeat).
REPEAT MEMO A–MEMO B—Playback cycles between memo points A and B (A–B Repeat).
REPEAT Auto Punch I/O—Auto Punch In/Out is rehearsed repeatedly.
C
AUTO PUNCH, PRE, IN, OUT & POST indicators
The AUTO PUNCH indicator shows that the AUTO PUNCH In/Out function is ON. The IN
and OUT indicators light up when the LAST REC IN and OUT points have been set. When a
song is positioned on or after the PRE, IN, OUT, or POST point, the corresponding indicator
flashes.
PRE—This indicator flashes when a song is at the Pre-Roll point.
IN—This indicator lights up when the LAST REC IN point has been set and it disappears when
a song is located on or after the specified IN point.
OUT—This indicator lights up when the LAST REC OUT point has been set and it disappears
when a song is located on or after the specified OUT point.
POST—This indicator flashes when the song is located at the Post-Roll point.
D
Track record indicators
These indicators show which tracks are selected for recording.
7
Display
MD4—Owner's Manual