Tape In Section - Yamaha MC 24/12 Owner's Manual

TAPE IN section

This section enables you to control line-level signals input from the TAPE IN jacks. Input
signals from the TAPE IN jacks can be routed to the ST bus or directly to the C-R MONITOR
OUT jacks and PHONES jack.
A
ST (Stereo) control
This control knob determines the level of input signals at the TAPE IN jacks that are sent to on
ST
1
the ST buses.
0 10
2
B
ON switch
ON
TAPE IN
This switch turns on and off the signals sent from the TAPE IN jacks to the ST bus. This switch
setting does not affect signals (input from the TAPE IN jacks) that are monitored via the C-R
MONITOR OUT jacks and PHONES jack.
Note: Set the Monitor source select switch (C-R MONI section
to "TAPE IN" to monitor the TAPE IN signals via the C-R MONITOR OUT jacks and
PHONES jack.
PFL
L R CTL
L
TAPE
ON
IN
R
Signal flow in the C-R MONI section, PHONES section, and TAPE IN section
ST
L R
from AFL
PFL
PFL/AFL
TAPE IN
ST
TAPE IN section
1
) in the C-R MONI section
from MTRX
1 2
PFL•AFL/TAPE
MATRIX
L
C-R
ON LEVEL
MONITOR
OUT
R
LEVEL PHONES
MC32/12, MC24/12—Owner's Manual
13