Midi Data Format; Midi Transmit Note Number - Yamaha DTXPLORER Drum Trigger Module DTXPLORER Owner's Manual

MIDI Data Format

1. Channel Message
Channel messages described below are sent from the drum triggers only.
Other messages are also sent with the sequencer.
1.1 Key On Key Off
Note range: 0 (C-2) to 127 (G8) (10ch only)
Velocity range: 1 to 127 (note on only)
1.2 Control Change
4 - foot controller (10ch only)
1.3 Program Change
2. System Exclusive Message
2.1 Parameter Change
2.1.1 GM system ON
$F0 $7E $7F $09 $01 $F7 (Hexadecimal)
Sets all the data except the MIDI master tuning data to its initial value.
3. System Realtime message
3.1 timing clock
Sends data.
3.2 start, stop
Sends data.
3.3 active sensing
Send the messages within an interval of approximately 300 msec.

MIDI Transmit Note Number

Input Instrument
1 Snare
1 Snare-open rim
1 Snare-close rim
2 Hi tom
3 Mid tom
4 Low tom
5 Ride
5 Ride edge
Note Number Input
31
34
37
48
47
43
51
52
Instrument
6 Clash
6 Clash edge
7 HI-Hat open
7 HI-Hat close
7 HI-Hat foot close
7 HI-Hat foot splash
8 Kick
9 Option
Note Number
49
57
46
42
44
85
33
55
31