Foreword; Accessories (Please Make Sure The Following Items Are Included In The Package.); Options; About The Product Names - Yamaha DME4io-ES Owner's Manual

Foreword

Thank you for choosing a Yamaha DME8i-ES/DME8o-ES/DME4io-ES Digital Mixing Engine Satellite.
In order to take full advantage of the features and performance provided by the DME8i-ES/DME8o-ES/DME4io-ES, we urge
you to read this owner's manual thoroughly before connecting or using the unit. Keep this manual in a safe place for future ref-
erence.
Accessories (Please make
sure the following items are
included in the package.)
• DME8i-ES/DME8o-ES/DME4io-ES Owner's
Manual (this document)
• CD-ROM
• AC power cord
• Euroblock plug (16P) x 1
• Euroblock plug (3P) x 8
• Rubber feet x 4

Options

Control Panels
• ICP1 Intelligent Control Panel
• CP4SW Control Panel
• CP4SF Control Panel
• CP1SF Control Panel
NO T E
For more information on your Control Panel, refer to the owner's
manual that came with the Control Panel, as well as the DME
Designer Owner's Manual.

About the Product Names

In this manual, models DME8i-ES, DME8o-ES, and
DME4io-ES are all called "DME Satellite," and models
DME64N and DME24N, DME8i-C/DME8o-C/
DME4io-C and the DME Satellite are categorized as the
DME series.

About the Firmware Version

You can check the version number of the DME Satellite
firmware by using the DME Designer application software.
You can also download the latest firmware from the follow-
ing Yamaha website.
http://www.yamahaproaudio.com/

Preparation

Connecting the AC power cord

Be sure to turn all devices OFF before connecting AC
mains power.
CAUTION
First plug the female-connector end of the AC cord into the
[AC IN] socket on the rear panel of the DME Satellite, then
plug the male plug into an appropriate AC mains outlet.
Be sure to use the voltage specified for the device.

Turning the power on and off

To prevent the initial power-on surge from generating a
large noise spike or damaging your speaker system, turn
the devices on in the following order: audio sources, mixer
(such as M7CL or PM5D), DME Satellite, and finally
CAUTION
power amplifiers.
Reverse this order when turning power off.
1.
Press the [POWER] switch to turn on the
power to the DME Satellite.
2.
Press the [POWER] switch again to turn off
the power.
NO TE
The DME Satellite remembers scene settings when you turn off
the power.
When you turn on the power to the DME Satellite, it will start up
with the same scene settings.
You can use the "Last Mem. Resume" setting in DME Designer
to set up the DME Satellite so that at the startup it will recall the
scene selected before you turned off the power to the device.
• Do NOT turn off the power to the DME Satellite while
it is receiving data from DME Designer or while it is
being manipulated from an external device. Otherwise,
a malfunction may occur.
• Even when the power switch is turned off, electricity is
still flowing to the product all the minimum level.
CAUTION
When you are not using the product for a long time,
make sure to unplug the power cord from the wall AC
outlet.
DME8i-ES/DME8o-ES/DME4io-ES Owner's Manual
7