Long Term Storage - Land Pride BS30 Operator's Manual

Section 3: Maintenance & Lubrication
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the attachment when storing it for long periods and at the
end of the season. This will help ensure the unit is ready
for field use the next time you hook-up to it.
1. Clean off any dirt and grease that may have
accumulated on the Bale Spear. Scrape off
compacted dirt and then wash its surface thoroughly
with a garden hose.
2. Inspect Bale Spear for loose, damaged, or worn
parts and adjust or replace when needed. Refer to
"Inspect Bale Spear" on page 18 for detailed
instructions.
3. Repaint parts where paint is worn or scratched to
prevent rust. Ask your Land Pride dealer for aerosol
touch-up paint. They are also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
Land Pride Touch-up Paint
Part No. Part Description
821-070C PAINT GP GLOSS BLACK SPRAY CAN
4. Replace all damaged or missing decals.
5. Store Bale Spear on a level surface in a clean, dry
place. Inside storage will reduce maintenance and
make for a longer life.
6. Follow all unhooking instructions on page 16 when
disconnecting tractor or skid steer from the Bale
Spear.
7. Do not allow children to play on or around the stored
Bale Spear.
12/7/18 BS30, BSE30, BS40, BSE40, BS50, & BSE50 For Skid Steers and Tractors With Front Loaders Bale Spears 319-
Table of Contents
19