Assigning a Voice to Individual Pads ("CU " Custom Kit)
The DD-35 contains a total of 148 high quality drum sounds (see the "Drum Voice List" page 17)
— and you can assign these freely to each of the four drum pads. Try assigning some different
voices and create your own "CU " Custom Drum Kit.
• Any changes made to one of the preset drum kits will automatically be saved in the " CU "
Custom Drum Kit.
• Any data assigned to the custom kit will be replaced by factory default values (" 09 ") when
the power is turned off.
• Both the Custom and " 09 " drum kit contents are the same until modified (see the "Drum
Kit List" page 20).
00
01
46
47
00
01
46
47
1
Press and hold the [PAD] button.
Press and hold the [PAD] button, and the latest assigned voice number
is shown in the display.
Voice number
Display
24
24
.
124
24
2
Enable a pad for voice selection by simulta-
neously holding the [PAD] button and striking the
appropriate pad.
The currently assigned voice number for the pad is shown in the dis-
play.
3
Select a Voice Number.
You can select the voice by repeatedly striking the pad, (while listen-
ing to the voice) or by turning the DIAL .
G Striking the pad to select a voice.
While holding down the [PAD] button, strike the desired pad repeat-
edly, to increment through the voice numbers one-by-one.
G Using the DIAL to select a voice.
Simultaneously hold down the [PAD] button and turn the DIAL
clockwise to continuously step up through the voice numbers, and
turn the DIAL counter-clockwise to step down through the voice
numbers.
Repeat the previous steps 2 and 3 for any or all of the DD-35's pads.
4
Play the Pads.
After you've assigned a voice to the desired pad, and you release the
[PAD] button, the DD-35 automatically saves your edits to the custom
kit. You can now play the sounds you have assigned to the pads.
Play the Pads
Comment
—
Values of 100 and over are indicated by a sin-
gle dot.
11