Changing A Setting - Yamaha Clavinova CVP-103 Owner's Manual

Changing a Setting

There are several ways to change a function's value. Here are two of the
main ways:
Using the data dial or [–] and [+] buttons
Once you have selected a function, you can change its setting with the
data dial or the [–] and [+] buttons. Since you have just selected KBD
VOL, try turning the dial or pressing the [–] button until it reads 0.
The KBD VOL function sets the keyboard volume. When you set it to
0, you will find that the keyboard won't produce any sound, no matter
how high you set the [MASTER VOLUME] slider!
Using the LCD buttons
You can also increase a setting by simply pressing and holding the
corresponding LCD button. For now, since you'll want to hear your key-
board later on, press and hold the leftmost LCD button until the value for
KBD VOL is back up to 127.
Hold down to increase.
Once you've got the keyboard volume back where it belongs, you can
learn about a couple of other ways to change settings.
.................................
..................................................................................
Using the LCD Display Controls
You can press the [–] and [+] buttons
repeatedly to change the value a little, or
hold them down to change it quickly.
Refer to page 23 for details on the KBD
VOL function.
This is why you should release the LCD
button quickly when you select a func-
tion: you could end up raising its value
when you want to lower it!
17
CVP-103