Operation Of The File Selection Display - Yamaha CLP295 Owner's Manual

Operation of the File Selection Display

In the File Selection display, you can select the Voice (page 28)/Song (
In the example here, we'll call up and use the Song Selection display.
1
1
Press the [SONG SELECT] button to call up the Song Selection display.
2
Press the TAB [ √ ][ ® ] buttons to select the desired drive (PRESET/USER/USB).
About PRESET/USER/USB
PRESET .............. Internal memory to which the preprogrammed data are installed as preset data.
USER ................. Internal memory that allows both reading and writing of data.
USB ................... USB storage device, such as USB flash memory/floppy disk drive, etc., which is connected
n Hereafter in this manual, any USB storage device such as USB flash memory/floppy disk, etc. will be referred to as "USB
storage device."
3
Select a folder (if necessary).
Several Songs may be together in a
folder. In this case, the folder(s) will
appear in the display (see the illustration
at right). Press one of the [A]–[J] buttons
to select a folder.
Press the [8 π ] (UP) button to call up
the next highest level folder.
4
Select a page (if the display has several pages).
When the drive contains more than ten Songs, the display is divided up into several pages. The page indica-
tions are shown at the bottom of the display. Press one of the [1 π ]–[6 π ] buttons to select a page.
5
Press one of the [A]–[J] buttons to select a Song.
You can also select a Song by using the [DATA ENTRY] dial, then press the [ENTER] button to execute.
6
Press the [EXIT] button to return to the previous display.
26 CVP-409/407 Owner's Manual
3, 5
4
to the [USB TO DEVICE] terminal.
page 35 )/Style (page 44), etc.
3, 5
2