Metronome Functions; Left Pedal Mode; Piano Song Part Cancel Volume - Yamaha Clavinova CLP-555 Owner's Manual

After selecting "F5. Y ", press the [+/YES] button to engage the metronome function sub-
mode, then use the [<] and [>] buttons to select the desired metronome function, as listed
below.
Use this function to set the time signature of the metronome as required (i.e. the number of
unaccented beats that occur between each accented beat). Use the [–/NO] and [+/YES]
buttons to set the time signature to "0" (no accent), or a value between "2" and "6", as re-
quired. Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting: "0".
Use the [–/NO] and [+/YES] buttons to set the metronome volume as required. The vol-
ume range is from 1 through 20. A setting of "1" produces minimum sound, while a setting of
"20" produces maximum metronome volume. Press the [–/NO] and [+/YES] buttons simulta-
neously to recall the default setting: "10".
This function sets the left pedal for normal soft-pedal operation, or for song start/stop
operation. Use the [–/NO] and [+/YES] buttons to select the desired left-pedal mode. "1" is
the normal soft-pedal mode, and "2" is the start/stop mode. When the start/stop mode is
selected, the left-pedal functions in the same way as the panel [START/STOP] button.
This functions sets the volume at which a "canceled" part is played during piano song
playback (see page 11 for information on the "part-cancel" function). Use the [–/NO] and [+/
YES] buttons to set the volume as required. The volume range is from 0 through 20. A setting
of "0" produces no sound, while a setting of "20" produces maximum volume. Press the [–/
NO] and [+/YES] buttons simultaneously to recall the default setting: "5".
The Function Mode
27