The Equalizer - Yamaha Clavinova CLP-295GP Owner's Manual

Setting the rotation speed of the
rotary speaker*
[RotarySpeed (Rot.Speed)]
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 71.
A
Main
RotarySpeed
C
Setting range:
Slow/Fast
Adjusting the depth of the DSP
effect* [DSPDepth]
This sets the depth of the DSP effect (page 80).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 71.
A
Main
DSPDepth
C
Setting range:
1 (output only the original sound with almost no effect
applied) - 127 (output only the sound processed by the
effect)
Adjusting the brightness of the
sound* [Brightness]
See the procedure on page 71.
A
Main
Brightness
C
Setting range:
–64 - +63
Detailed settings for the voices [VOICE SETTING]
B
Set?-->
NO YES
Slow
D
B
Set?-->
NO YES
127
D
B
Set?-->
NO YES
0
D
Adjusting the resonance effect*
[HarmonicContent (Harmonic)]
See the procedure on page 71.
A
Main
HarmonicContent
C
Setting range:
–64 - +63
TIP
Resonance can produce a distinctive "peaky" tone, making the
sound brighter and harder.
Adjusting the low-range frequency of

the equalizer*

[EQ LowFreq. (EQ L.Freq)]
TERMINOLOGY
Equalizer:
An audio equalizer divides the frequency spectrum into multi-
ple regions and enables the user to adjust the relative ampli-
tude of each region.
Low Gain
Low Freq.
See the procedure on page 71.
A
Main
EQ LowFreq.
C
Setting range:
32 Hz - 2.0 kHz
CLP-295GP Owner's Manual
B
Set?-->
NO YES
0
D
High Gain
High Freq.
B
Set?-->
NO YES
32
D
81