Control Change On/Off; The Multi-Timbre Mode - Yamaha Clavinova CLP-154S Owner's Manual

MIDI Functions

Control Change ON/OFF

Normally the Clavinova will respond to MIDI control change data received from an external MIDI device or
keyboard, causing the selected Clavinova voice to be affected by pedal and other "control" settings received
from the controlling device. The Clavinova also transmits MIDI control change information when one of its
pedals are operated.
This function makes it possible to cancel control change data reception and transmission if you do not want
the Clavinova voices to be affected by control change data received from an external device or vice versa.
MIDI/
ANO 2
TRANSPOSE
CLAVINOVA
TONE
= Control Change OFF
CLAVINOVA
TONE
= Control Change ON

The Multi-Timbre Mode

CLAVINOVA
MIDI/
ANO 2
TRANSPOSE
E. PIANO
= Multi-Timbre Mode ON
E. PIANO
= Multi-Timbre Mode OFF
18
Z
CLAVINOVA
Hold down the [MIDI/TRANSPOSE] button.
TONE E. PIANO
X
Press the [CLAVINOVA TONE] voice selector. If the CLAVINOVA
TONE LED is lit when the [CLAVINOVA TONE] voice selector is
pressed, you have turned control change reception/transmission OFF. If
the CLAVINOVA TONE LED is not lit when the [CLAVINOVA
TONE] voice selector is pressed, you have turned control change re-
ception/transmission ON.
C
Release the [MIDI/TRANSPOSE] button.
The Multi-Timbre mode is a special mode in which the Clavinova voices
can be independently controlled on different MIDI channel numbers by an
external MIDI device. The Multi-Timbre mode can be activated as follows:
Z
TONE E. PIANO
Hold down the [MIDI/TRANSPOSE] button.
X
Press the [E. PIANO] voice selector. If the E. PIANO LED is lit when
the [E. PIANO] voice selector is pressed, you have turned the Multi-
Timbre mode ON. If the E. PIANO LED is not lit when the [E. PI-
ANO] voice selector is pressed, you have turned the Multi-Timbre
mode OFF.
C
Release the [MIDI/TRANSPOSE] button.