Table of Contents
Advertisement
3. Rotate the VALUE dial to select the Quick Setting you
want.
The tone switches to that of the selected sample settings.
* You can select "—: User Setting" to return the settings to
their condition prior to selecting the Quick Settings.
4. To select Quick Settings for another effect, repeat Steps
2 and 3.
* Even after performing this procedure, the settings selected in
Step 3 are maintained as is and carried over to the Quick
Settings for the next effect.
5. Press [EXIT] to return to the Play screen.
* If you want to save a tone with the settings you've made, use
the Write procedure (p. 25) to save the tone to a User patch.
Chapter 2 Creating Your Own Favorite Tones (Patches)
Making More Precise Effect
Settings
Each effect comprises several different kinds of parameters.
You can more precisely create the sounds you want by
editing each of these parameters individually.
fig.02-210
1. Press the on/off button for the effect with the settings
2. Press PARAMETER [
3. Rotate the VALUE dial to change the value of a setting.
4. Repeat Steps 2 and 3 for any other parameter settings
5. If you further want to change parameter settings in any
6. Press [EXIT] to return to the Play screen.
* If you want to save a tone with the settings you've made, use
1
1
you want to change.
The parameters for the selected effect appear in the
display.
] [
parameter whose settings are to be changed.
When more than one parameter is shown in the display,
press PARAMETER [
] [
the parameter to be set.
You can jump to the core parameters by pressing
PARAMETER [
] (or [
PARAMETER [
] (or [
there aren't that many parameters, the GS-10 jumps to
the last (or first) parameter.
you want to change.
other effects, repeat Steps 1 through 4.
the Write procedure (p. 25) to save the tone to a User patch.
3
2
6
] to select the
] to move the cursor to
]) while holding down
]). With items for which
23
Advertisement
Table of Contents
