Advertisement
•
SMCWEBS-N (1) will connect to the rest of SMCWEBS-N but it will not accept
wireless clients directly. This device will need the MAC addresses of devices (1), (2)
and (3).
•
SMCWEBS-N (2) will connect to SMCWEBS-N (1) and at the same time will provide
wireless connectivity to wireless clients (laptops, PDAs, etc). In SMCWEBS-N (2) it
will be needed to enter the MAC address of the SMCWEBS-N (1).
•
SMCWEBS-N (3) & (4) will connect to SMCWEBS-N (1) without need of configuring
any MAC address. They will also provide connectivity to wireless devices (laptops,
PDAs, etc).
Figure 1
3/9
How-To
WDS with SMCWEBS-N
Advertisement
