BASIC
Quick Guide
7
Turn the MASTER knob in the MAIN section to the
tion.
8
Adjust the LEVEL knobs for all occupied channels.
For each input device you have connected: Generate sound from the device
while adjusting the corresponding channel's LEVEL knob. Adjust so that the
LEVEL meter occasionally reaches the "0" level.
9
Now turn the MASTER knob in the MAIN section again
as necessary to adjust the overall output level.
10
EMX512SC/EMX312SC/EMX212S
This position
si-
po
It is acceptable for the LIMITER
lamps to flash on briefly at
times, but if they remain lit con-
tinuously then there is risk of
damage to your speakers or to
the internal amp. Reduce the
MASTER knob setting so that
these lamps do not stay on.