Auxiliary Dc Connector - Yamaha STAR XV19CSX(C) Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Auxiliary DC connector

To access the auxiliary DC connec-
tor
1. Remove the rider seat. (See page
3-11.)
2. Unhook the battery band, and then
3 remove the battery cover.
1. Battery band
2. Battery cover
3. Turn the ECU (Electronic Control
Unit) over to move it away from the
wire harness protective cover as
shown.
EAU44582
2
1
1. Wire harness protective cover
2
2. ECU (Electronic Control Unit)
4. Open the wire harness protective
cover.
1
1. Auxiliary DC connector
A 12-V accessory connected to the
auxiliary DC connector under the rider
seat can be used when the key is in the
"ON" position.
CAUTION:
The accessory connected to the
auxiliary DC connector should not
be used with the engine turned off,
and the load must never exceed 36
W (3 A), otherwise the battery may
discharge.
To prevent electrical shock or short-
circuiting, make sure that the cap is
installed when the auxiliary DC con-
nector is not being used.
3-17
WARNING
ECA15310
EWA12531