Table of Contents
Advertisement
VL Version 2
Lvl to P/S
¯
Sets the level of excitation signal applied to the pipe or string. Negative values
produce a reverse-phase excitation signal.
Lvl to Drv
¯
Sets the level of excitation signal applied to the driver. Negative values produce a
reverse-phase excitation signal.
LPF Cutoff
¯
Sets the cutoff frequency of the low-pass filter applied to the excitation signal.
Pulse Width
¯
Sets the pulse width of the excitation signal. Higher values produce a broader pulse
width.
Pulse Width at 50%
Pulse Width at 70%
VlSns to Lvl
¯
Sets the sensitivity of excitation signal level to keyboard velocity. Higher values
produce a greater variation in excitation signal level in response to keyboard velocity.
VlSns to LPF
¯
Sets the sensitivity of the excitation signal low pass filter cutoff frequency to
keyboard velocity. Higher values produce a greater variation in filter cutoff frequency in
response to keyboard velocity.
VlSns to PW
¯
Sets the sensitivity of excitation signal pulse width to keyboard velocity. Higher
values produce a greater variation in excitation signal pulse width in response to key-
board velocity. Negative values result in reduced pulse width.
50%
50%
Pulse
Width
70%
30%
Pulse
Width
45
Advertisement
Table of Contents
