6.8 Wiring Of I/O Module And External Device; Wiring Of Spring Clamp Terminal Block - Mitsubishi Electric NZ2GN2S1-32D User Manual

6.8
Wiring of I/O Module and External Device

Wiring of spring clamp terminal block

Wire to be used
The following table describes the wire to be connected to the spring clamp terminal block.
Diameter
22 to 16 AWG
Applicable solderless terminal
The following table lists the applicable solderless terminal.
Product Terminal shape
name
Bar solderless Ferrule (with insulation
terminal sleeve)
Ferrule (without
insulation sleeve)
*1 When using a solderless terminal with an insulation sleeve, select the terminal whose applicable wire size is 0.75 or smaller.
6 INSTALLATION AND WIRING
88

6.8 Wiring of I/O Module and External Device

Type
Stranded
Model
AI0.34-10TQ
AI0.5-10WH
AI0.75-10GY
A0.5-10
A0.75-10
A1.0-10
A1.5-10
Material
Copper
Applicable wire Bar solderless terminal
*1
size tool
0.34 CRIMPFOX6
0.5
0.75
0.5
0.75
1.0
1.5
Temperature rating
75 or more
Contact
PHOENIX CONTACT GmbH
& Co. KG